Control-and-Release Strategy with Ian Whiting
My friend, CyclingSavvy graduate Ian Whiting, rides a lot on shoulderless Massachusetts highways. Big rigs also use them. Ian likes to shoot video as he rides. I am pleased to host his videos here on the Savvy Cyclist. There are already Savvy Cyclist posts about how to be safe when cycling around big trucks in urban traffic, but now Ian will show us a couple of examples of CyclingSavvy control-and-release strategy for the open road.
What is control-and-release strategy?
CyclingSavvy control-and-release strategy is to control the travel lane when passing is unsafe, releasing control by moving over to the right when passing becomes safe. This strategy is about cyclists’ engaging actively with motorists, and it is about release as much as it is about control. Ian’s video shows a couple of different ways to release on the same uphill stretch, with oncoming traffic and a restricted sight line over the hilltop. Both clips in the video start at the same traffic signal. Here’s the location in Google Maps.
Pulling over
In Ian’s first clip, he starts out on a green light; the truck catches up with him partway up the hill. He pulls over into a convenient driveway entrance to let the truck pass. There is nothing unusual about this – except – A second truck was following the one he pulled over to let pass. There’s a lesson in that: cyclists should always check before re-entering the roadway, even after only pulling aside briefly. What you saw behind you is now in front of you, but you might not have seen everything that was behind you.
The “loop-the loop” – not a conventional control-and-release strategy!
In the second clip, Ian is waiting at the traffic light when a big rig pulls up behind. He does a “loop the loop” — a U turn, backtracking, and another U turn to get behind the truck. This is not a conventional control-and-release strategy, but it works. Clever!
I advise using the loop-the-loop technique only when traffic is stopped, and passing would be illegal. In Ian’s video, he is first in line at a red light. The loop-the-loop is practical only when you can easily reach a lane for traffic in the opposite direction — so, almost always on a two-lane highway, though also on a multi-lane highway if you are waiting to turn left. You need to check for illegal passing, but also for traffic in the lane where you will backtrack — including traffic turning into that lane.
Generating goodwill
The loop-the-loop technique probably won’t generate goodwill to the same extent as pulling over. The truck driver will probably think that you decided to turn around and go back where you came from. But either way, it works better to be behind the big rig than in front. Well, except for the truck’s diesel smoke. But you would get that anyway, only at a different time.
That’s a spiffy trick! I did something similar one day with a traffic circle. There was a dump truck behind us as we entered the traffic circle (which had no other traffic at the time) and instead of continuing on our course, we looped the traffic circle. The truck went on, and wallah! We had not truck on our rear.
Ian, I love that! Thank you for sharing. This post reminds me of a statement I’ve always remembered from John Rider, one of my first bicycle safety instructors. “It’s no skin off my nose,” he said, referring to the various strategies that make it easy for motorists to pass bicyclists. And that’s because: Once they go around, wah lah! Naked pavement. There is nothing scary about empty asphalt. That observation is from CyclingSavvy founder Keri Caffrey :-)
I might, at some point, use the “Loop-to-Loop” technique if I believe it is in my best interest safety-wise to do such a move. However, be aware you could certainly receive a citation for both illegal U-Turns, etc.
Respectfullly,
CS
FYI: it’s “voilà.” You can skip the accent if you like, but please, no “wah lah.”
Ah, M. Glover, malheureuesement je ne peux pas regler l’orthographie française ni de Mme. Hoffmann ni de Mme. Karabell.
The loop-to-loop reminds me of an avoidance technique used decades ago, pre- CS, when cyclists would circle at intersections because they did not choose to stop. Many cyclists were not proficient at clipping in and out or doing a track-stand and rather than stop, they would circle and confuse/annoy motorists. The traffic light appears to be a great place to just pull over and let the big-rigs go on their way without needlessly/impatiently exposing oneself to unnecessary middle-of-the road maneuvering.
For the 1st release, there’s “a lot” of “shoulder” there to use to instead simply move over to the other side of that white line. Because uphill, you’re going (or can go) slow enough to maintain control pedaling with just 6-inches of blacktop. Trust the trucker to pass with sufficient berth (which just might be less than 4-feet) and/or low velocity (remember, he’s driving uphill too) to keep things safe. With respect to the pull over and stop, consider being a tandem captain with a stoker that weighs 100lb more than you. Keep pedaling–possibly in the lane–and acknowledge the trailing motorists. Pull over when there’s sufficient blacktop (like what was shown) to keep pedaling (plus sufficient blacktop to execute a merge–you’ll need more width for that maneuver). Signal clearly and attempt to merge back in. If no joy from the trailing motorist, it would become time to stop, dismount and walk the rest of the way up. For the 2nd release (loop-the-loop), I got signals from my gut about several hazards. Isn’t a premise of CyclingSavvy to keep aligned with the rules-of-the-road? Stop like any other driver. Control your through lane because oncoming drivers might suddenly enter their left-turn-only-lane. Release once past.